Fluke 5700A Series II Operator's Manual page 163

ADJOUT?
INCR
MULT
NEWREF
OFFSET
OFFSET?
OLDREF
OUT_ERR?
REFOUT?
SCALE
SCALE?
SCAL_ERR?
BTYPE
BTYPE?
CLOCK
CLOCK?
CUR_POST
CUR_POST?
EXTGUARD
EXTSENSE
FORMAT
LIMIT
LIMIT?
*LRN?
RANGE?
RANGELCK
Table 5-1. Command Summary by Function
Error Mode Commands
Returns the adjusted output magnitude and frequency
Increments or decrements the output
Multiplies the reference by a value and establishes a new reference
Establishes a new reference
Sets and enables or disables an offset
Returns the value of the present offset
Sets the output to the present reference
Returns the UUT error computed by the calibrator
Returns the value of the present reference
Activates and deactivates scaling
Returns scaling information
Returns the value of the scale error if scaling is active
Instrument Configuration Commands
Selects the amplifier type for voltage or current boost
Returns the amplifier types set for voltage and current boost
Sets the clock/calendar
Returns the setting of the clock/calendar
Selects the active binding post for current output
Returns the active binding post for current output
Opens and closes an internal connection between GUARD and LO
Opens and closes an internal connection between SENSE and OUTPUT
Restores calibration constants and setups to factory defaults
Sets positive and negative output limits
Returns the programmed positive and negative output limits
Returns a list of commands that would duplicate the present state
Returns the present output range
Locks in the present range, or selects autoranging
Remote Operation 5
Commands
5-13