Summit X670 Series Switch Leds - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit x150/x250e/x350/x440/x450/x450a/x450e/x460/x480/x650/x670 series
Hide thumbs Also See for Summit X150 Series:
Table of Contents

Advertisement

Summit X670 Series Switch LEDs

Table 34
describes the LEDs on the Summit X670 series switches.
Table 34: LEDs on the Summit X670 Series Switches
Label or Type
Front Panel LEDs
M (Management)
FAN
1, 2, 3
P1, P2
(Power Supply)
Stack 1 – 4
MD
2-digit Stack number Indicator
Left digit (1)
Right digit (1 – 8)
Ethernet Ports
1 – 48
Management Port
Back Panel
QSFP+ port LED (on
installed VIM3 module)
Summit Family Switches Hardware Installation Guide
Color/State
Steady green
Blinking green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Steady amber
Blinking amber
Off
Steady green
Blinking green
Steady green
Blinking green
(Other switch LEDs are
also lit.)
Blinking amber
(Other switch LEDs
are off)
Off
Reserved for future use.
Indicates the position of this switch in the SummitStack configuration.
Upper half blinking
Lower half blinking
Lit steadily
Steady green
Blinking green
Off
Steady green
Blinking green
Steady green
Blinking green
Summit X670 Series Switches
Meaning
Power-on self test (POST) has finished.
Normal operation
POST in progress
POST failed.
No external power is attached.
Normal operation
Failure
No power
Normal operation
Power is attached, but no power is on.
Power failure
No power is attached.
Link OK on the indicated stack port.
Activity on the indicated stack port.
The motion detector feature is enabled. This
LED stays lit if the motion detector feature
shuts down the other LEDs on the switch.
Motion has been detected. The green blinking
continues for a few seconds, and then the
MD LED lights steady green.
Motion has been detected. The motion detector
feature turns on the other switch LEDs. The
amber blinking continues for a few seconds,
and then the MD LED lights steady green.
The motion detector feature is disabled.
This switch is the stack master node.
This switch is the stack backup node.
This switch is a standby node in the stack.
Link OK
Activity
No link or port disabled.
Link OK
Activity
Link OK
Activity
117

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents