Summit X650 Series Switches - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches

Summit X650 Series Switches

The Summit X650 series switches have 24 front-panel Ethernet ports that provide 10-gigabit Ethernet
connectivity using fixed 10GBASE-T RJ-45 ports or installable SFP+ optical modules.
The Summit X650 series switches include the following base models:
Summit X650-24t switch
●
Summit X650-24x switch
●
A serial console port on the front panel of the Summit X650 series switch allows you to connect a
terminal and perform local management. An Ethernet management port can be used to connect the
system to a parallel management network for administration. Alternatively, you can use an Ethernet
cable to connect this port directly to a laptop to view and locally manage the switch configuration. The
Ethernet management port supports 10/100/1000 Mbps speeds.
The rear panel of the switch requires an installed versatile interface module or VIM.
types of VIM available for the Summit X650 series switch.
Table 32: Versatile Interface Modules for Summit X650 Series Switches
VIM Model
VIM1-SummitStack
VIM1-10G8X
VIM1-SummitStack512
VIM1-SummitStack256
VIM3-40G4X
The Summit X650 series switch must have an installed VIM; the switch will not operate correctly
without one.
NOTE
The Summit X650 switches require VIM1 or VIM3 modules. Other VIM types that may appear to be
mechanically compatible with the Summit X650 switches will not function if they are installed in these switches.
Cooling is provided by a replaceable fan module. Two power supply bays accommodate either AC or
DC power supplies.
110
(page 111)
(page 112)
Number of
Ports Port Type
2 20-Gbps stacking
4 1-Gbps SFP data
2 20-Gbps stacking
8 10-Gbps SFP+ data
4 128-Gbps stacking
2 128-Gbps stacking
4 40-Gbps QSFP+ data
More Information,
Is on . . .
page 146
page 145
page 146
page 147
page 147
Summit Family Switches Hardware Installation Guide
Table 32 lists the