Summit X440-48T-10G Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches
The rear panel of the Summit X440-48p switch
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-C2 External Power Module
●
The connecting redundant power supply cable is shipped with the power module. See
EPS-C2 Chassis" on page 298
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 42: Summit X440-48p Switch Rear Panel
2
1 = AC power input connector
2 = Stacking ports
3 = Redundant power connector

Summit X440-48t-10G Switch

The front panel of the Summit X440-48t-10G switch
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of
●
high-density copper connectivity
Two unpopulated SFP ports (ports 47 and 48) that provide 2 Gbps of fiber connectivity. The SFP
●
ports support both 100BASE-FX and 1000BASE-X optical modules.
Ports 47 and 48 are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Two unpopulated SFP+ ports (ports 49 and 50) that provide 20 Gbps of fiber connectivity
●
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
●
management
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 65.
62
(Figure 42) includes:
for more information.
3
(Figure
"Combination Ports and Failover" on page
1
SH_275
43) includes:
"Summit X440 Series Switch LEDs" on
Summit Family Switches Hardware Installation Guide
"Installing an
22.