Chapter 1: Summit Family Switches
Summit X440-48t Switch
The front panel of the Summit X440-48t switch
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of
●
high-density copper connectivity
Four unpopulated SFP ports (ports 45–48) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 45 through 48 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
●
management
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
65.
Stack number indicator
●
Figure 39: Summit X440-48t Switch Front Panel
1
4 5
1 = Ethernet management port
2 = 10/100/1000BASE-T ports
3 = SFP ports
The rear panel of the Summit X440-48t switch
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-C2 External Power Module
●
The connecting redundant power supply cable is shipped with the power module unit. See
"Installing an EPS-C2 Chassis" on page 298
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
60
(Figure
39) includes:
"Combination Ports and Failover" on page
"Summit X440 Series Switch LEDs" on
2
4 = Stack number indicator
5 = Console port
6 = Combination ports
(Figure
40) includes:
for more information.
Summit Family Switches Hardware Installation Guide
22.
3
6
SH_276