Removing A Summit X650 Series Switch; Removing A Summit X650 Ac Power Supply - Extreme Networks Summit X150 Series Hardware Installation Manual

Removing a Summit X650 Series Switch

This section provides procedures for removing a Summit X650 series switch from a two-post or
four-post equipment rack.
Before you remove a Summit X650 series switch from the rack, remove all installed power supplies, as
described in one of the following sections:
"Removing a Summit X650 AC Power Supply" on page 367
●
"Removing a Summit X650 DC Power Supply" on page 368
●

Removing a Summit X650 AC Power Supply

To remove a Summit X650 AC power supply:
1 Disconnect the power cord from the wall outlet and from the power input connector on the power
supply.
2 Push the latching tab to the left as you pull the handle to disengage the power supply from its
internal connectors (Figure
3 Carefully slide the power supply out of the switch and set it aside.
Figure 308: Removing a Summit X650 AC Power Supply
Summit Family Switches Hardware Installation Guide
308).
Removing a Summit X650 Series Switch
SH_096
367