WARNING!
When working with laser optic modules, always take the precautions listed below to avoid exposure to
hazardous radiation.
Never look at the transmit LED/laser through a magnifying device while the transmit LED is
●
powered on.
Never look directly at a fiber port on the switch or at the ends of a fiber cable when they are
●
powered on.
Invisible laser radiation can occur when the connectors are open. Avoid direct eye exposure to the
●
beam when optical connections are unplugged.
Never alter, modify, or change an optical device in any way other than suggested in this
●
document.
GBIC, SFP (Mini-GBIC), QSFP+, XENPAK, and XFP Regulatory
Compliance
Extreme Networks pluggable optical modules and direct-attach cables meet the following regulatory
requirements:
Class 1 or Class 1M Laser Product
●
EN60825-1:2007 2nd Ed. or later, European standard
●
FCC 21 CFR Chapter 1, Subchapter J in accordance with FDA & CDRH requirements
●
Application of CE Mark in accordance with 2004/108/EEC EMC Directive and the 2006/95/EC Low
●
Voltage Directives
UL and/or CSA registered component for North America
●
47 CFR Part 15, Class A when installed into Extreme products
●
Summit Family Switches Hardware Installation Guide
Fiber Optic Ports and Optical Safety
381