Summit Replaceable Internal Power Supplies - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Replaceable Internal Power Supplies

The Summit X460, X480, X650, and X670 series switches have two bays for installing one or two
Extreme Networks AC or DC power supplies. In a redundant power configuration, both power
supplies are fully fault-tolerant and load-sharing. You can remove one power supply without
interrupting switch operation.
Specific switch series and models are compatible with different power supply models, as shown
in Table 44.
Table 44: Summit Replaceable Internal Power Supply Compatibility
Summit Switch Model
Summit X460-24t
Summit X460-48t
Summit X460-24x
Summit X460-48x
Summit X460-24p
Summit X460-48p
Summit X480 series
Summit X650 series*
Summit X670-48x-FB
Summit X670V-48x-FB
Summit X670-48x-BF
Summit X670V-48x-BF
* Extreme networks does not recommend combining an AC and DC power supply in the same Summit X650
series switch.
NOTE
An AC power input cord is not provided with a Summit AC power supply. You can order an appropriate
cord from Extreme Networks or from your local supplier. The power cord must meet the requirements listed in
"Power Cord Requirements for AC-Powered Switches and AC Power Supplies" on page
Summit Family Switches Hardware Installation Guide
300 W AC 450 W AC
(10930) (10917)
300 W DC 450 W DC
(10934) (10918)
Yes
Yes
Yes
Summit Replaceable Internal Power Supplies
Power Supply Model
550 W AC-FB 550 W AC-BF
(10925) (10927)
550 W DC-FB 550 W DC-BF
(10926) (10928)
Yes
Yes
850 W AC
(10914)
750 W AC 850 W DC
(10931) (10915)
Yes
Yes*
464.
133