Summit External Power Supplies - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit External Power Supplies

The following external power supplies are available for use with Summit X150, X250e, X450, X450a, and
X450e series switches:
EPS-LD external power supply
●
EPS-160 external power module (used with EPS-T chassis)
●
EPS-500 external power supply
●
EPS-600LS external power module (used with EPS-C chassis)
●
EPS-150DC external power supply (used with EPS-T2 chassis)
●
Table 94: EPS-LD External Power Supply (Model 45019)
For use with the Summit X450a-24t and X450e-24p switches
Operational voltage range
Nominal input ratings
Input Current
Line frequency range
Maximum inrush current
Output
Power supply cord type
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Efficiency
Heat dissipation, Watts, BTU/hr
Power consumption, Watts, BTU/hr
Ambient operating temperature
Maximum continuous DC output shall not exceed 465 Watts.
Summit Family Switches Hardware Installation Guide
(Table 94)
(Table 97)
90 to 264 V
100 to 240 V , 50 to 60 Hz, 10 A
6 A at 100 V , 2.5 A at 240 V
47 to 63 Hz
30 A at 115 V , 60 A at 230 V
-50 V , 7.5 A max, 375 Watts
12 V , 7.5 A max, 90 Watts
AC
IEC 320 C14
IEC 320 C13
Refer to "Power Cord Requirements for AC-Powered Switches and
AC Power Supplies" on page
2
18 AWG (0.75 mm
or
2
16 AWG (1.0 mm ) over 6 feet
>75% at 100% load
123 W, 419.7 BTU/hr
588 W, 2006.3 BTU/hr
0° C to 40° C (32° F to 104° F)
Summit External Power Supplies
(Table 95)
(Table 98)
(Table 99)
464.
) up to 6 feet or 2 meters
459