Feature - Mitsubishi CS-40507 Owner's Manual

Using the Active A/V Network Feature (cont.)
using the quick program button (QUICK PROGI_kAM)
When you press QUICK PROGRAM to begin programming your
VCR:
• Active AN Network will turn on your VCR and bring it to the
"Program to Record" screen. (If the VCR's clock has not been
set, you will see the "Set the clock" screen. See your VCR's
Owner's Guide for information about setting the clock.)
• Active AN Network will turn on your TV (if it is off), and switch
the TV to INPUT-1.
You can program your VCR by pointing your remote control at
the TV.
You must press QUICK PROGRAM to end programming
your VCR; when you do so:
• Active ._JV Network will turn off your VCR (unless a tape is
currently playing or recording), if your .TV has been set to
"Active".
• Active AN Network will return your TV to the channel it was
on before, or turn it off (if it was off originally).
using the PLAY button (AUTO PLAY)
When you press PLAY on the remote:
• Active A/V Network will turn your VCR on and begin playing
the tape (if any).
• Active A/V Network will turn your _¢ on and swiitch it to
INPUT-1.
When you turn your TV off:
• If your TV has been set to "Active," your VCR wi]] turn off,
unless it is playing or recording.
using the PIP button (SIMUIATED TWO TUNER :PIP)
You must be watching a broadcast channel on Antenna.-A or
Antenna-B to use the Active A/V Network PIP function correctly.
When you press the PIP button on the remote to bring up a PIP
image:
• Your VCR will automatically turn on.
• You can see the VCR's pic,ture in the small PIP image.
94 Chapter 4: Using the Special Features