Mitsubishi CS-40507 Owner's Manual page 50

: _-: _ _ i _ ::,L_
Important:
using your remote control to operate your VCR
After you have set up your remote control for your particular brand
of VCR, you can use the remote to operate your VCR.
{]_ Use the select buttons across the top of the remote control to
choose the layer that you "set up" to operate your VCR: VCR-A,
VCR-B, or CABLE.
Point the remote control at the VCR and press the desired
buttons.
If you are using a Mitsubishi VCR, you will be able to use all of the
buttons on the remote control to operate your VCR except for MUTE,
VOLUME and the PIP function buttons, which will always operate
TV itself.
If you are using another brand of VCR, you can use the POWER,
CHANNEL, REC, STOP, PAUSE, REW, PLAY and FF buttons to
operate your VCR.
using your remote control to operate y,our cable box
After you have set up your remote control for your particular brand
of cable box, you can use the remote to operate: your cable box.
O Use the select buttons across the top of the remote control to
choose the layer that you "set up" to operate your cable box:
VCR-A, VCR-B, or CABLE.
Point the remote control at the cable box and press the desired
buttons.
Only the POWER and CHANNEL buttons can be used to operate
your cable box.
Getting Started 49