Mitsubishi CS-40507 Owner's Manual page 73

Setting the timer
_Important:
This special feature allows you to program the TV to turn on
automatically at a time that you set. To set the timer:
"IV Main Menu
(_ First Time Set-Up
Customize Viewing
[_ Advanced Features
Use ADJUST to select.
Then press ENTER.
Press MENU to exit menus.
i
._ Advanced Features
_. Set the timer
Use Parental lock
Use Super Quick View
Use Advanced PIP
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
TV Main Menu.
Set the timer
Day --
Start time - -
Antenna - -
Channel - -
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
Advanced Features Menu.
O Press the MENU button on the
remote control The TV Main
Menu will appear on the screen.
O Use the ADJUST buttons to
select "Advanced :Features."
Press ENTER.
You will see the "Advanced
FeaLures" screen. Use the
2d:)JUST buttons to select
"Set the timer'." Press ENTER.
O Use the ADJUST buttons and
the ENTER button to set Day,
Start time, Antenna, and
Channel.
After setting the timer, make sure
that the program timer indicator
is; lit. The indicator will light in
o:ra:nge when the TV is turned on
and light in red when the TV is
turned[ off. The i:adieator will light
in _.Teen when using the menus, or
when you have locked the TV.
If you press the CANCEL button
while setting the timer, the arrow
will move to the previous item. To
clear the timer, ]?ress CANCEL
wit:h the arrow next to "Day."
When the timer turns the TV on, the display will flash. If you do
not press any TV function buttons for about 5 milxutes, the TV will
automatically turn off. Press a TV function butto:a (such as the
display button) to keep the TV on and turn off the flashing display.
72 Chapter 3: Operating Your TV