Mitsubishi CS-40507 Owner's Manual page 33

TV + separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home with two
separate antennas, you will need to combine the antennas to
connect them to the TV. To do this you will need a UHF/VHF
combiner. (There are different combiners for different kinds of
leads. Check with your local electronics store for the kind of
combiner you need.)
Pictured to the right is a standard
combiner.
To connect separate UHF and VHF
antennas to your television:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
O Press the combiner onto the ANT-A terminal on the television.
\\ l\l
\\ I\\_
VHF Antenna UHF Antenna
(Channels 2-13) (Channels 14-69)
nil/ .......
yl/ '"""V
-- Flat Twin Lead
External
Antenna
Flal Twin Lead-
300 Ohm to
75 Ohm
O Combiner
Back Side
O
l(
TV Rear Terminals
'__@
@
W_,J_F
O ®'
Basic Connections 31