Mitsubishi CS-40507 Owner's Manual page 69

Adjusting the picture (cont.)
The "Color bias" function is used to help your TV reproduce colors,
especially skin tones, as realistically as possible. You can set this
function to "Average," "Accurate," or "Skin tone."
• The "Average" setting will adjust the skin tones based on the
other colors on the screen.
• The "Accurate" setting does not make adjustments to the
picture. Use this setting when watching professionally produced
video tapes and laserdiscs (such as rental movies).
• The "Skin-tone" setting will add warmth and red tones to the
picture.
The "_" function is used to control the closed captien decoder. For
details, see "Using the closed caption decoder," page 69.
adjusting the video functions
When adjusting the video
functions, you can use the buttons
on the remote control or on the
control panel.
O
]?ress the VIDEG button
repeatedly until the function
you want to adjust appears
on-screen.
(The functions appear at the
center of the bottom of the
screen.)
While the function is still on the
screen, use the ADJUST
buttons to adjust the function's
setting.
The functions will disappear
from the screen after a few
seconds. (You cannot adjust a
function if it is not on the
screen.)
68 Chapter 3: Operating Your TV