Feature - Mitsubishi CS-40507 Owner's Manual

t Using the Active A/V Network Feature
_>Important:
_Important:
This A/V Network is a special feature that makes it easier to use
your TV and your other Mitsubishi A!V components together. When
you connect the A/V Network, you caa point the remote conl_rol at
the TV, and it will "pass" the re:mote control command to the other
components.
Additionally, you will gain even more benefits if you have a
Mitsubishi VCR equipped for the Active A/V Network. The Active
A/V Network allows you to perform many of the commonly used
features of your system at the press of just one button.
This section will explain the various features of the
Active A/V Network.
before you begin
• You must have connected a:n A/V Network cable from the Active
A/V Network terminal of your TV to the A._ Network IN
terminal of your VCR. See "TV ÷ Mitsubishi products that have
A/V Network terminals," page 41.
• You must have connected your VCR to Input I of your 'IV.
• You must have set your T¥'s "P,_V Network" setting to "Active"
or "Basic." See "Setting the A/V Network," page 60.
• Your VCR's remote control switch (if arty) should be set to
,¢VCR_A.,,
• Your VCR's video mute setting should be turned ON.
The A/V Network is only available for select Mitsubishi
components.
what the Active A/V Network does
The Active A/V Network makes it easier and faster to use_ the VCR's
Quick Program and Play commands and the T_'s PIP commands, as
described on the next page.
When using the Active A/V Network, you should always point your
remote control[ at your TV.
Using the Active A/V Network Feature 93