Mitsubishi CS-40507 Owner's Manual page 60

Adding and deleting channels
Either "In memory" or
"Not in memory" will
appear.
Important:
After all available channels have been meraorized with Lhe
"Memorize channels" feature, channels with weaker signals can be
added or deleted with the following procedure.
Q First Time Set-Up
Set the clock
Memorize channels
• Add/delete channels
Set A]V Network
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
TV Main Menu.
O Press tlhe MENU button on the
remote control. The TV Main
Menu will appear oil the screen.
Use the ADJUST buttons to
select "First Time S,_t-Up.
Press ENTER.
Use the ADJUST buttons to
select "Add/delete channels."
Press ENTER.
-F Add/delete eha,lnels
Antenna Am-A
Channel 006
In memory
Use ADJUST to select
another channel.
Press CANCEL to delete.
Press MENU to return to
First Time Set-Lip Menu.
The "Add/delete channels"
screen will appear. Use the
ADJUST buttons to select the
channel you would like to add
or delete.
(You can also use the
CHANNEL controls and the
INPUT button on the remote
control to change channels and
inputs.)
If a channel is labeled "In
mernm3r," use the CANCEL
button to remove it from
memm_¢. If a channel is labeled
"Not; in memory," use the
ENTER button to add it to
menmry.
O
When you are finished adding
and deleting channels, press
the HOME button to return to
normal TV viewing.
Adding a channel to memory allows you to tune to the channel with
the channel controls. If a channel is not in. memory, you can only
tune to it with the number buttons.
In this menu, you can use the CHANNEL buttons to change
channels and the INPUT button to switch inputs.
Getting Started 59