Mitsubishi CS-40507 Owner's Manual page 30

TV + antenna or cable without a decoder box
equipment you will need
If you have a standard 75-ohm coaxial (:able, you will not need
additional equipment If your antenna has two leads (called flat
twin leads), you will need:
• one 75-300 ohm transformer.
75-Ohm Coaxial
Cable
--
Flat Twin Leads
O
0 0
/
Transformer
TV Rear Terminals
3AUTK3N: J_'O NOT CONNECT THE ATTEN3
EXTERNAL SPEAKER TERMINALS BORNE
TOSP_ERS THATH_VE ANY DES EN
OTHER PROI_C'r C(_INEC_r ED "to AU'rRE
tHEM.
,@
m
@ ®,
VHF,'UtlF
connecting a cable
0 Push or screw the end of the cable oato the ANT-A terminal on
the television.
connecting an antenna with fiat twin leads
0 Use a screwdriver to connect the leads to the transformer.
O Push or screw the transformer onto the ANT-A terminal on the
television.
28 Chapter 2: Connecting Your TV