Using The Active Av Network Feature - Mitsubishi CS-35707 Owner's g Manual

Using the Active AV Network Feature
_>Important:
E>Important:
This AV Network is a special feature that raakes it easier to use
your TV and your other AV components t%:ether. When you con-
nect the AV Network, you can point the rernote control at the TV,
and it "passes" the remote control command to the other compo-
nents.
Additionally, you gain even more benefits ffyou have a Mitsubishi
VCR equipped for the Active AV Network. The Active AV Network
allows you to perform many of the commonly used features of your
system with the press of just one button.
This section explains the various features of the Active AV Net-
work.
before you begin
You must connect an A/V Network cable from the At.rive A/V
Network terminal of your TV to the _JV Network IN terminal of
your VCR. See "TV+Mitsubishi products that have ._JV Network
terminals," in Chapter 2.
• You must connect your VCR to Input 1 (INPUT-l) of your TV.
• You must set your TV_s "AV Network" to "Active" or "Basic."
See "Setting the AV Network," in Chap Ler 3.
• Set your VCR's remote control switch (if any) to '_VCR-A."
• Turn on your VCR's video mute setting.
The AV Network is only available for select Mitsubishi compo-
nents.
what the Active AV Network does
The Active AV Network makes it. easier and faster to u,_e the VCR's
Quick Program and Play commands.
When using the Active AV Network, always point your remote
control at your TV.
82 Chapter 4: Using the Special Features