Mitsubishi CS-40507 Owner's Manual page 37

TV + VCR + cable with a decoder box
equipment you will need
This hook-up will allow you to record scrambled channels while
watching a non-scrambled channel. When you complete this
hook-up, you should set up your remote control to operate your
cable box (see page 47).
To complete the hook-up, you will
need:
• four 75 ohm coaxial cables,
one two-way splitter,
one set of RCA pin-type audio
cables,
one RCA pin-type video cable,
(if connecting a standard VCR),
OR
one S-video cable (if your VCR
has an S-video output).
Basic Connections 35