Denon AVR-2805 Operating Instructions Manual page 94

1. Auto Setup/Room EQ
Auto Setup/Room EQ Default settings
1
Auto Setup Power Amp Set this to switch the surround back channePs
Assignment power amplifier for use for zone2. SURROUND BACK
2 Manual EQ This parameter is for optimizing the Room EQ with which the audio All Channel and Frequency=OdB
Setup signals are produced from the speakers
3 Room EQ Set the Room EQ setting with All or Assign for each surround mode All
Setup
4 Direct Mode Set the ON/OFF setting of Room EQ, in the case of the surround OFF
Setup mode is in Direct or Pure Direct.
Set this to switch the Mic tnput iack for use for Mic or V.Aux L+ Mic
S Mic Input Select channel #_put jack.
2. Speaker Setup
Speaker Setup
1
2
3
4
5
Speaker
Configu ration
Delay nine
Channel
Level
Crossover
Frequency
Subw00ferMode
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for full
size, full range) to auto_'lqatically set the composition of the signals
output from the speakers and the frequency response
This para_-ileter is for opth-ilizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum
effects
Set the frequency (Hz) below which the bass so of the various
speaker is to be output from the subwoofer
This selects the subwoofer speaker for playing deep bass signals.
Front Sp.
Large
Front L & R
12 ft (3.6 m/
Front L Front R
OdB 0dB
Center Sp.
Small
Center
12 ft (36 m)
Center
O dB
Default settings
Subwoofer Surround Sp
Yes Small
Subwoofer Surround L & R
12 ft (3.6 m/ 10 ft (3 0 m/
Surround Surround Surround Surround
L R Back L Back R
0dB 0dB 0dB 0dB
80Hz
LFE
Surround Back Sp.
Small / 2spkrs
SBL & SBR
10 ft (30 m)
Subwoofer
OdB
3.Input Setup
Input Setup Default settings
Input CD DVD VDP TV DBS V. AUX VCR 1 VCR+2 CDR/TAPE
1
Digital In This assigns the digital input jacks for the different input source
Assignment sources Digital COAX1 COAX2 OPT1 OFF OPT2 OPT6 OPT3 OFF OPT4
hputs
Ext. In
2 Subwoofer
Level
3
4
Component
In Assign
Video Input
Mode
Auto Tuner
Presets
Set the Ext In Subwoofel terminal playback
level
This assigns the color difference(componentl video input iacksfor
the different input sources.
Set the input signal to be output from the monitor output terminal
FM stations are received automatically and stored in the memory.
Subwoofer = +15 dB
DVD VDP TV DBS VCR 1 VCR 2 V AUX
VIDEO1 NONE VIDEO2 VIDEO3 NONE NONE NONE -- --
A1 + A8
B1 -+B8
C1 -+C8
D1 --D8
E1 +E8
F1 +F8
G1 +G8
AUTO
876/891/98.1/1079/901/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz/90.1/90 1 MHz
901 MHz
901 MHz
901 MHz
901 MHz
901 MHz
94