Denon AVR-2805 Operating Instructions Manual page 78

• Operating the surround mode and surround parameters frem the main unit's panel.
1 Turn the SELECT knob to select the surround mode.
SURROUND SELECT
MODE
%
(Main unit) (Main unit/
• When turned clockwise
12 1,3
,-DIRECT _ STEREO _DOLBY PRO LOGIC ]Ix _ DTS NED:6 _ 5/7CH STEREO _WIDE SCREEN _SUPER STADIUM
MONO CLASSIC _ JAZZ CLUB _ ROCK ARENA-
VIRTUAL_ MATRIX _ VIDEO GAME _MOVlE _ CONCERT
• When turned countercleckwise
DIRECT _ STEREO _DOLBY PRO LOGIC ]]x _ DTS NED:6 _ 5/7CH STEREO _WIDE SCREEN _ SUPER STADIUM_
MONO CLASSIC
-VIRTUAL_ MATRIX _ VIDEO GAME _ MOVlE_CONCER_ JAZZ CLUB _ ROCKARENA
-_ To select the surround mede while adjusting the surround parameters or tene centrol, press the surreund mode butten then operate
the selecter.
SURROUND PARAMETER
%
Press the SURROUND PARAMETER butten.
Press and hold in the surround parameter butten to select the parameter you want to set.
• The parameters which can be set differ fer the different surround modes. (Refer to "Surreund Medes and
Parameters" on page 81 .)
(Main unit)
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC [Ix, DTS NED:6 modes and the input signal switches to a
digital signal encoded in Delby Digital, the Dolby surround mode switches autematically. When the input signal switches to a DTS signal, the
mode automatically switches to DTS surreund.
78