Denon AVR-2805 Operating Instructions Manual page 34

,%
(Remote control unit/
Enter the setting.
The "Channel Level" screen reappears.
÷ To cancel the settings, press the CURSOR down to select "Level Clear" and "Yes" on the "Channel Level" screen, then make the settings
again.
NOTE:
When adjusting the level of an active subweofer system, you may also need te adjust the subweofer's own volume control.
•_ When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect
all surreund modes. Consider this mode a Master Channel Level adjustment mode.
•_ After yeu have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and
adjust channel levels that will be remembered for each of those medes. Then, whenever you activate a particular surround sound mede,
your preferred channel level adjustments for just that mode will be recalled. Check the instructions fer adjusting channel levels within each
surround mode. (See page 68)
•_ You can adjust the channel levels for each of the fellowing surround modes: PURE DIRECT/DIRECT, STEREO, DOLBY/DTS SURROUND,
5/7 CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME,
MATRIX and VIRTUAL.
• Set the crossever frequency mede according to the speaker system being used.
1
@
(Remote control unit}
Select the "Crossover Frequency" at the Speaker Setup Menu.
J J
•T_::, b" _ ,_ _g_ r _ ::, _ _, _._ _"
_., r __.__> :_:,_._",," _ _" r" r __ "_,
2. Speaker Setup
1. Speaker Confi&.
2. Delay Time
3, Channel Level
_4, Crossover Frequency
5. Subwoofer Mode Setup
Exit
2
(Remote control unit}
Remote contlol unit}
Display the Crossover Frequency screen.
Select the frequency.
I
I
• 4 88 H:: I).
• 40/60/80/100/120/150/200/250Hzcanbe
selected.
2-4. Crossover Frequency
4
Remote contlol unit/
Enter the setting.
The Speaker Setup Menu reappears.
34