Denon AVR-2805 Operating Instructions Manual page 63

[1] Adjusting the sound quality (TONE)
The tone control function will not work in the PURE DIRECT and the
DIRECT mode.
1
2
TONE
CONTROL
%
(Main unit}
The tone switches as follows each time
the TONE CONTROL butten is pressed.
BASS _TREBLE
SELECT With the name of the volume to be
(O_. adjusted selected, turn the SELECT knob
to adjust the level.
(Main unit)
• To increase the bass or treble: Turn the control clockwise.
(The bass or treble sound can be increased te up to +6 dB
in steps of 1 dB.)
• To decrease the bass or treble: Turn the control clockwise.
(The bass or treble sound can be decreased to up to -6 dB
in steps of 1 riB.)
L-
231
TONE
DEFEAT
%
(Main unit}
If you de net want the bass and treble to
be adjusted, turn on the tone defeat
mode.
•_ The signals do not pass through the
bass and treble adjustment circuits,
providing higher quality sound.
[2] Listening over headphone
Plug the headphone' plug inte the
jack.
PHONES
•_ Connect the headphone to the f/'-_'_ _(_
PHONES jack. _t
The pre-out output (including the
speaker output) is automatically
1
turned off when headphone are
connected.
[3] Turning the sound off temporarily (MUTING)
1
(Remote control unit}
Use this to mute the audio output
temporarily.
Press the MUTING button.
•_ Cancelling MUTING mode.
Press the MUTING button again.
[4] Combining the currently playing sound with the desired image
1
Simulcast playback
Use this switch to monitor a video source other than the audio
source.
Press the VIDEO SELECT button, turn the FUNCTION knob
until the desired source appears on the display.
FUNCTION
V_D
S
(Main unit) (Main unit)
•_ Cancelling simulcast playback.
• Select "SOURCE" using the VIDEO SELECT button and
the FUNCTION button.
• Switch the program source te the component connected
to the video input.
• Press the SOURCE button.
1
NOTE:
To prevent hearing loss, do not raise the volume level excessively
when using headphone.
111
I F U i[ C [ i O ii I
63