Denon AVR-2805 Operating Instructions Manual page 67

[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode)
1
2
4
5
_ ON JIo_F
%
(Main unit)
Press the "Power switch" button.
ZON
{Main unit)
Press the ZONE2/REC button.
The display switches as fellews each
time the butten is pressed.
ZONE2 _ RECOUT
FUNCTION
(Main unit)
With "ZONE2 SOURCE" displayed, turn
the FUNCTION knob and select the
source you wish to output.
• The display switches the selected
seurce.
Start playing the source to be output.
• For operating instructions, refer to the manuals ef the
respective components.
FUNCTION
(Main unit)
Te cancel, turn the function knob and
select "SOURCE".
F U i[ C [ ][ 0 ii
;_:0 ii E 2 '_;0 U R C iZ
NOTES:
• The signals of the source selected in the ZONE2 mode are also
output from the VCR-1, VCR-2 and CDR/TAPE recerding output
jacks.
• Digital signals are not eutput frem the ZONE2 audio eutput
jacks.
• Refer te page 65, 66 about the MULTI ZONE connectiens.
[2] Remote control unit operations during multi-source playback (selecting the input source)
TMs eperatien is not pessible in the REC OUT mode.
This eperation is possible when ZONE2 mede is selected.
(_ Select "ZONE2" using the ZONE2 button.
{Remote control unit)
2
Z0NE2 Press the ZONE2 "ON" button.
OFF ON
_J
(.(_) (_ "_ To turn eff the ZONE2 mode, press
the ZONE2 "OFF" button.
{Remote control unit)
2
1
Press the input source button
• The ZONE2 seurce switches directly.
4 ®
{Remote control unit)
5
The output level ef the ZONE2 OUT
terminals can be centrolled using the
VOLUME + and - buttons on the remote
control unit.
The eutput level of ZONE2 OUT can be
controlled only if ZONE2 vol. level is set
"Variable" at Zene2 Control in System
Setup Menu. (see page 43,44)
•_ DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
- - - dB (MINIMUM)
CHANNEL
(Remote control unit)
When the ZONE2 SOURCE function is
set to TUNER, the preset channel can be
selected using the CHANNEL + and -
buttens on the remete control unit.
SYSTEM S_R_0U_
m 4
The main zene
output can be
turned on and off
with the "MAIN
ON/OFF" button.
67