Denon AVR-2805 Operating Instructions Manual page 77

• To operate the surround mode and surround parameters frem the remete control unit.
DSP
SIMULATION
%
{Remote control unit)
Select the surreund mede for each input
channel.
The surround mede switches in the fellewing erder each time
the DSP SIMULATION button is pressed:
SURROUND
PARAME]ER
(Remote control unit)
m
I
:k :_;Li r" F' 9 r" 9 m @"i: @ r"
R 0 0 i'i _ .ll i'i e ,::i i u _,_ I,
Press the surreund patameter button.
Display the surreund parameter screen.
•_ The screen fer the selected surround
mede appears.
ROCK ARENA
I
EFFECT_IO_
EQiTONE_
SB CH OUT
_:_
Yes_
4
G
(Remote control unit)
Set the parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating buttons after cempleting the
settings. The settings are automatically finalized and the
normal display reappears after several secends.
When the settings are made using the buttons en the remote
control unit, press the "ENTER" or "SURROUND
PARAMETER" button to finish.
NOTES:
• The surreund speaker setting can alse be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the curser left button is pressed, "CINEMA EQ." and "D.COMR" are autematically turned eff, "ROOM
SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to "30ms" and "LFE" to "OdB".
• The "ROOM SIZE" expresses the expansion effect fer the different surreund medes in terms ef the size of the seund field, net the actual
size ef the listening reem.
• When playing PCM digital signals or analeg signals in the DOLBY PRO LOGIC 1I, DOLBY PRO LOGIC IIx. DTS NEO:6 modes and the input
signal switches to a digital signal encoded in Dolby Digital, the Dolby surreund mode switches autematically. When the input signal switches
tea DTS signal, the mode automatically switches to DTS surround.
77