Denon AVR-2805 Operating Instructions Manual page 73

4
Play a pregram source with the _l_Pe_ , _ mark.
SURROUNO SURROUNO
(Remote control unit) (Main unit)
Display the surreund parameter menu.
SURROUND SURROUND
PARAMETER PARAMETER
% %
BDDIGITAL--Light
_Light
Light
--Light
• The Dolby Digital indicater lights when playing
Dolby Digital sources.
• The DTS indicater lights when playing DTS
sources.
• Press the SURROUND BACK butten.
Lights when the Surreund Back CH is on.
Dolby Digitai EX
D. COMP _FOT_ 1.
LFE _ 0 dB
EQiTONE4
AFDM
4rOVF] )
SB CH OUT
_MTRX ON
Yes _
DTS ESMTRX6: i
C D. COMP 4IQF_] I.
LFE ,q 0 dB _"
EQ/TONE'_
AFDM _I_FT] _,
SB CH OUT
4ESMTRX
Yes 4
(Remote control unit) (Main unit)
NOTE: The display on the screen differs depending on
whether yeu are performing the operation from the
main unit or the remete control unit.
Select the varieus parameters. I1_ Adjust the parameter settings.
13
SURROUND _ SELECT
_# PARAMETE(_ (O _
(Remote control unit) (Main unit) (Remote control unit) (Main unit)
• Dialogue Normalization
The dialegue normalization function is activated automatically when playing Dolby Digital pregram sources.
Dialogue nermalizatk>n is a basic function ef Dolby Digital which automatically normalizes the dialog level (standard level) ef the signals which are
recerded at different levels for different program sources, such as DVD, DTV and ether future fermats that will use Dolby Digital.
These contents can be verified with the STATUS and ON SCREEN butten.
Display
I
0 F _:_: e -i: ....i ,::iB
The number indicates the normalizatk>n level when the currently playing pregram is normalized te the
standard level.
NOTE:
• When "Default" is selected and the cursor left button is pressed, "CINEMA EQ." and "D.COMR" are automatically turned eff, "LFE" is
reset, and the tene is set te the default value.
The input signal can be checked by pressing the remete contrel unit's ON
SCREEN button.
SIGNAL:
fs:
FORMAT:
[e];,l i'ESl
OFFSET:
FLAG:
Checking the input signal
ONSCREEN
Displays the type ef signal (DTS, DOLBY DIGITAL, PCM, etc.). °mP'_[_ _'_"
Displays the input signal's sampling frequency. (Remote controlunit)
Displays the input signal's number of channels.
"Number of frent channels/Number of surreund channels/LFE en/off"
"SURROUND" is displayed for 2-channel signal sources recorded in Dolby Surround.
Displays the dialog nermalization effset value.
Displays the special identification signal recorded in the input signal.
"MATRIX" is displayed when matrix precessing is conducted on the surreund back
channel, "DISCRETE" is displayed when discrete processing is cenducted.
Not displayed when ne identification signal is recorded.
In addition, screen information is displayed in the fellowing order when the ON SCREEN butten is
pressed repeatedly:
OSD-1 Input signal
OSD-2 Input/eutput
OSD-3 Aute surround mode
OSD-3 _ 9 Tuner preset stations
[_:Dolby Digital EX
RoomEQ:Normal
StGNAL:DOLBY DIGITAL
fs :48kHz
FORMAT:3/3A 1
OFFSET:-4dB
FLAG :MATRIX
[_""_:DTS ES DSCRT6. 1
RoomEQ:Normal
SIGNAL:DTS
fs :48kHz
FORMAT:3/3A 1
FLAG :DISCRETE
NOTE:
OSD-3: This is displayed when the auto surround mode is set to "ON" and the input mode is set to "Auto".
it is not displayed when the input mode is set to "Analog" or "EXT. IN".
73