Denon AVR-2805 Operating Instructions Manual page 76

Av surround receiver
Hide thumbs Also See for AVR-2805:
Table of Contents

Advertisement

r_
DsP SURROUND
SIMULATION
The AVR-2805/985
is equipped
with
a high
perfermanoe
DSP
(Digital
Signal
Prooesser)
which
uses
digital
signal
precessing
te synthetically
recreate
the
sound
field.
One
of ten
preset
surround
medes
can
be selected
according
to the
program
source
and the
parameters
can
be
adjusted
accerding
to the conditions
in the
listening
room
te achieve
a mere
realistic,
powerful
seund.
These
surround
modes
can also be used
fer pregram
sources
net recerded
in Delby
Surreund
Pro Legic,
Delby
Digital
er DTS.
Select this to achieve an atmosphere
like that of a movie theater
with a large screen.
In this mode, all signal sources are played
1
WIDE SCREEN
in the 7.1-channel
mode,
including
Dolby Pro Logic and Dolby Digital 5.1-channel
sources.
Effects
simulating
the multi surround
speakers of movie theaters are added to the surround
channels.
Select this when watching
baseball or soccer
programs
to achieve
a sound as if you were actually at the stadium.
This mode
2
SUPER STADIUM
provides
the longest reverberation
signals.
3
ROCK ARENA
Use this mode to achieve the feeling of a live concert
in an arena with reflected sounds coming from all directions.
4
JAZZ CLUB
This mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives jazz a very vivid realism.
5
CLASSIC CONCERT
Select this for the sound of a concert
hall rich in reverberations.
MONO MOVIE
6
(NOTE 1)
Select this when watching
monaural movies for a greater sense of expansion.
7
VIDEO GAME
Use this to enjoy video game sources.
Select this to emphasize
the sense of expansion
for music
sources
recorded
in stereo.
Signals consisting
of the difference
8
MATRIX
component
of the input signals
(the component
that provides
the sense of expansion)
processed
for delay are output
from the
surround
channel.
9
VIRTUAl
Select this mode to enjoy a virtual sound field, produced from the front 2-channel speakers
The front left channel signals are output to the surround and surround
back signal left channels, the front right channel signals are
10
5CH/7CH
STEREO
output to the surround and surround
back signal right channels, and the in-phase component
of the left and right channels is output
to the center channel.
Use this mode to enjoy stereo sound.
._ Depending on the pregram source being played, the effect may not be very noticeable.
In this case, try other surreund medes, witheut werrying
about their names, te create a seund field suited te yeur tastes.
NOTE 1 : When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel deft er right), so input
signals to beth channels. If yeu have a seurce component
with only ene audio output (menephenic
camcerder, etc.) obtain a "Y" adapter
cable te split the mene output te two outputs, and connect te the L and R inputs.
Personal Memory
Plus
This set is equipped with a personal memorize function that automatically
memorizes
the surreund modes and input modes selected fer the
input different
sources.
When the input source is switched,
the modes set for that seurce last time it was used are automatically
recalled.
• _ The surreund
parameters,
tone centrel settings
and playback level balance fer the different
output channels are memerized
fer each
surreund mode.
76

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-985

Table of Contents