Denon AVR-2805 Operating Instructions Manual page 33

4
5
(Remote control unit/
Select the mede.
Select "Auto" or "Manual".
J
"[ , "[ o i'_ e ',', FI Li "i: O I _
2-3. Channel Level
i
,i
'_Test Tone _t:_[_
• ...........................
Test Tone Start [_t
Level Clear [_4
• Auto:
Adjust the level while listening to the test tones preduced
automatically from each speaker.
• Manual: Example: When the "Auto" mode isselected
Select the speaker frem which yeu want te produce the test tone to adjust the level.
(Remote control unit}
Select "Test Tene Start".
Select "Yes".
2-3. Channel Level
Test Tone _:_[_
_Test Tone Start [_4
Level Clear [_
6
(Remote control unit}
(Remole corn:rol unil:)
(Remote control unit/
G
(Remote control unit/
a. When the "Auto" merle is selected:
Test tones are automaticaNy emitted from each speaker.
The test tones are emitted from each speaker in the fellowing
erder, at 4-second intervals the first time and second time around, 2-
secend intervals the third time around and en:
,_ Ispkr d/z
! :
/ 2spk,s j
• _ When the surreund back speaker setting is set te "lspkr" fer
"Speaker Configuration", this is set te "SB".
2-3. Test Tone@
E_FL _-1 1 5d8_
C 0 5dB
FR 00dB
SR 00dB
SBR 00dB
SBL 0 OdB
SL 00dg
SW 00dB
Example: When the volume is set to-11.5 dB
while the test tone is being
produced from the Front Lch
speaker
Use the CURSOR left and right buttens te adjust all the speakers to the
same velume.
The volume can be adjusted between -12 dB and +12 dB in units ef 0.5 dB.
F: L _ _1 - :{ i ,<!75,::ii_{', Iv
b. When the "Manual" mede is selected :
Select the speaker.
¢7_' A djust all the speakers te the same w)lume.
33