Denon AVR-2805 Operating Instructions Manual page 55

(3) Using the system call function
Press tile button at which the system call signals have been stered.
• The stered signals are transmitted successively.
(1) Punch through button
Buttons used in the CD, CDR/MD, TAPE, DVD/VDP, and VCR
medes can be assigned to the buttens shown on the diagram at
the right which are not nermally used in the TV and DBS/CABLE
modes.
Fer example, when the CD mode is set to the punch through mode
in the TV mede, the CD mede's PLAY, STOP, MANUAL SEARCH,
AUTO SEARCH, PAUSE and DISC SKiP buttons' signals are sent
in the TV mode.
(2) Making the punch through setting
1
OFF
%
ON/SOURCE
Press the power ON/SOURCE button and
the OFF button at the same time.
• The LEARNED/TX indicator flashes.
2
Press the I1_ (play) button.
• TV and DBS/CABLE mede buttons and
LEARNED/TX indicator flash.
Press the mede button ef the equipment
CABLE
C_. _ for which Punch Through is te be set.
• The CD, CDR/MD, TAPE, DVD/VDP,
and VCR mede buttens and
LEARNED/TX indicator will flash.
Press the mede button ef the equipment that is te be
punched through.
• The mede button that was set will light.
55