Denon AVR-2805 Operating Instructions Manual page 70

Set the surround parameter mode.
SUROOUND
PARAMETER
%
(Remote control unit)
SURROUND
PARAMETER
%
(Main unit)
r ::, u F' B B m @ i: _:_
H ODE _ 41 PL :[ 3::::: C I,
DOLBY PL II
C EQ, S,
COMP4[_
EQ/TONE 1
SB CH OUT
[]_:_1_
Yes'l
•_ The on-screen display differs according te whether the eperatk)n is
perfermed from the main unit er the remete contrel unit.
4
Select the play mode.
SELEco _
(Remote control unit) (Main unit)
NOTE:
• The PL]]x mode is set when the "SB CH OUT" surround
parameter is set to "ON", and the PLff mode is set when this
parameter is set to "OFF".
• When the "SB CH OUT" parameter is set te "ON".(Set "SRBack" at the system set up to "1 spkr" or "2spkrs").
Display
1
J
H Oi::, E :_ _1 F'L :[ 3::::: C _"
(Pro LegicIIx Cinema mode)
:_: :_; Li r" F' B r" B m @ "i: @ r"
H0 [::_ E ',', 4 F'L :[ 3: : ::: H I,
(Pre LogiclIx Music mode)
(Pre Legic]Ix Game mode) /
• When the "SB CH OUT" parameter is set te "OFF".(Set "SP.Back" at the system set up to "None").
Display
H0 [::_ E ',', _ 1 P L 3::[ _: IP' 4 F'L :[ :[ H I,
(Pre LogicH Cinema mede) (Pro LogicH Music mode)
11
J/
H O D E: _ '1 F' L :[ 3: _ ll'
(Pro Logicff Game mode)
/
H0 [::_ E '_'_ _ 1 [ ::_ O L BY P L It
(Dolby Pro Legic mode)
5
6
Select the parameter to change. (See "Surround parameters (])" for a descriptien of each parameter.)
SURROUND
C_ PARAMETE(_
(Remote control unit) (Main unit)
•_ When set with the on-screen display using the remote
centrol unit while in the MUSIC mode, set the " I_ _" mark
to "OPTION _" using the A, and ",' curser buttons, then
press the d cursor button.
Press the ENTER button to return to the previous screen.
DOLBY PL t
C
DOLBY PL IIx MUSIC
OPTIONAL PARAMETERS
_PANORAMA [_:)[]
DIMENSION _ 3
CENTER WIDTH _ 3
Yes
Ex: DOLBY PLffx music mede screen.
Set the various surreund parameters.
(Remote cont ol unit) (Main uRit)
7
When the surround parameters are set using the buttons on
the main unit, stop operating buttens after completing the
settings. The settings are automatically finalized and the
nermal display reappears after several secends.
When the settings are made using the buttons en the remote
control unit, press the "ENTER" or "SURROUND
PARAMETER" button to finish.
NOTE:
• There are four Dolby Surround Pre Logic modes (NORMAL,
PHANTOM, WIDE and 3 STEREO). The AVR-2805/985 sets the
mode automatically according to the types of speakers set
during the system setup precess (page 30).
70