Denon AVR-2805 Operating Instructions Manual page 19

3.Input Setup
1
Digital In
Assignment
Ext. In
2 Subwoofer
Level
3 Component
in Assign
4 Video input
Mode
5 Auto Tuner
Presets
Input Setup Default settings
Input CD DVD VDP TV DBS V AUX VCR 1 VCR 2 CDR/TAPE
This assigns the digital input jacks for the different input source
Digital
hputs
Set the Ext In Subwoofer terminal playback level
This assigns the color difference (component} video input iacks for
the different input sources.
Set the input signal to be output from the monitor output terminal
FM stations are received automatically and stored in the memory.
COAX1 COAX2 OPT1 OFF OPT2 OPT8 OPT3 OFF OPT4
Subwoofer = +15 dB
DVD VDP TV DBS VCR I VCR 2 V AUX
VDEO1 NONE VIDEO2 VDEO3 NONE NONE NONE -- --
AUTO
A1 ,- A8 878/891/98.1/1079/901/90.1/90.1/90.1 MHz
B1 --B8 820/600/1000/1400/1500/1710 kHz/90.1/90 1 MHz
C1 --C8 901 MHz
D1 -_D8 901 MHz
E1 -_E8 901 MHz
F1 -_F8 901 MHz
G1 _G8 901 MHz
4.Advanced Playback
Advanced Playback Default settings
Set the audio delay to delay time the sound and synchronize it with 0 ms
1
Audio Delay the picture.
2
DolbyDigital Turn the audio compression on or off when down-mixing Dolby OFF
Setup Digital signals
3 Auto Surround Set the Auto surround mode function. Auto Surround Mode = ON
Mode
5.Option Setup
1
Power AMP
Assignment
2
Zone2 vol
Level
3 TgggerOutl
Setup
4 TiiggerOut2
Setup
Option Setup
Set this to switch the surround back channel's power amplifiel for
use for zone2.
This sets the output level the zone2 output jacks.
This menu is not displayed, when "ZONE2" is selected at Option
Setup "Power Amp Assign"
Set the Trigger Out1 output for the each input sources
Set the Trigger Out2 output for the each input sources
Default settings
Surround Back
Variable
5 Muting Level This sets the amount of attenuation at audio output muting.
This sets whether or not to display the on-screen display that
6
On Screen appears on the ]-i1onitor screen when the controls on the remote 0n Screen Display = ON / Mode 1
Display control unit or main unit are operated.
A setting to prevent flickegng.
Set whether or not to lock the system setup settings so that they Setup Lock = OFF
7 Setup Lock cannot be changed.
ZONE=MAIN
PHONO CD TUNER CDR/TAPE DVD VDP TV DBS VCR I VCR 2 V AUX
OFF OFF OFF OFF ON ON ON ON ON ON ON
ZONE 2
PHONO CD TUNER CDR/TAPE DVD VDP TV DBS VCR-1 VCR-2 V AUX
ON ON ON ON ON ON ON ON ON ON ON
-_-dB(minimum)
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor
is connected to both the AVR-2805/985's S-Video and video monitor output jacks and signals are input to the AVR-2805/985 from a video source (VDP, etc.)
connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output
the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 49.)
• The AVR-2805/985's on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with
small screens or low resolutions.
• The setup menu is not displayed when headphone are being used.
19