Denon AVR-2805 Operating Instructions Manual page 47

This butten can be pressed at any time during the system setup process te complete the process.
SYSIEM
SErUP
(Remote control unit)
Press the SYSTEM SETUP butten at the System Setup Menu.
•_ The changed settings are entered and the on-screen display
turns eff.
• On-screen display signals
Signals input to the AVR-2805/985 On-screen display signal output
VIDEO signa] input jack S-video signal input jack Video signal output to VIDEO Video signa] output to S- Video signal output to Color Difference
(yellow) MONITOR OUT jack (yellow) Video MONITOR OUT jack (Component) Video MONITOR OUT jack
1 x x C C C
2 C? x C? C? C?
3 x C? C? C? C?
4 C) C) x C) C)
(0: Signal x: No signal) (0: On-screen signals output x: On-screen signals not output)
NOTE:
• When a component video signal is input and when the "Vide(> Input Mode" is set to the component fixed mode at Input setup, the on-screen
display is only displayed when the System Setup, Surreund Parameters and On Screen buttons are eperated.
47