Configuration For Network Routing Service Or Element Manager Applications In Ecm - Nortel 1000 Applications Installation And Commissioning

Figure 100
Primary Security Service fingerprint window
12
Configuration for Network Routing Service or Element Manager
applications in ECM
The Network Routing Service or Element Manager applications must
be configured in ECM after installation is complete. For details about
configuration and security certificate creation see Security Management
Fundamentals (NN43001-604) () .
Linux Platform Base and Applications Installation and Commissioning
Copyright © 2007–2008 Nortel Networks
.
window" (page 99). Type Yes to verify the Primary Security
Service fingerprint.
The nortel password screen appears. Type the password of the
nortel account and press Enter. The connection to the Primary
Security Service server is complete and the installation finishes.
The installation takes approximately 30 minutes to complete.
After the installation is complete the disk automatically ejects
from the drive and a summary of the installation is shown on the
screen.
For detailed information about Element Manager see Element
Manager System Reference—Administration (NN43001-632) () .
For detailed information about Subscriber Manager see the
installation and configuration section of Subscriber Manager
Fundamentals (NN43001-120) () .
Nortel Communication Server 1000
NN43001-315 02.09
29 October 2008
Install the CS 1000 applications 99
--End--