Nortel 1000 Applications Installation And Commissioning page 118

118 CS 1000 on Linux base
Figure 109
Backup Scheduler 2
You can use the command sysrestore to perform system recovery, as
shown in
Backup files generated by the sysrestore command are named
according to the Linux base backup archive naming convention.
Sysrestore provides a list of the archives that are available on the backup
media.
Sysrestore restores application-specific data. Application data backup
and restoration is determined by the individual applications; for more
information refer to the appropriate application NTP.
ATTENTION
Archives created prior to Release 5.5 do not contain application configured
system data. If you use an archive created prior to Release 5.5 you cannot
restore application configured system data.
Figure 110
sysrestore command
You can also use the installation media as rescue media (CD/DVD for HP
DL320 G4 and IBM x306m servers), which supports the recovery of the
base system.
Linux Platform Base and Applications Installation and Commissioning
Copyright © 2007–2008 Nortel Networks
.
Note:
The CLI command sysbackup can be used to make a system
backup. For a list of Nortel Linux base CLI commands see
"Nortel Linux base CLI commands" (page
Figure 110 "sysrestore command" (page
Nortel Communication Server 1000
NN43001-315 02.09
29 October 2008
Table 11
141).
118).