Nortel 1000 Applications Installation And Commissioning page 98

98 Installation and configuration of applications on Linux base
9
Figure 98
Primary Security Service server TLAN IP address window
10
Figure 99
Primary Security Service server Fully Qualified Domain name window
11
Linux Platform Base and Applications Installation and Commissioning
Copyright © 2007–2008 Nortel Networks
.
The Primary Security Service server TLAN IP address screen
appears as shown in
TLAN IP address window" (page
the TLAN network interface Primary Security Service server.
Type Yes to confirm the TLAN IP address is correct or type No
to return to the Primary Security Service server TLAN IP address
screen. Press Enter to continue.
The Primary Security Service server Fully Qualified Domain
Name (FQDN) screen appears as shown in
Security Service server Fully Qualified Domain name window"
(page 98). Enter the Fully Qualified Domain name of the Primary
Security Service server. Type Yes to confirm the FQDN is
correct or type No to return to the Primary Security Service
server Fully Qualified Domain Name screen. For a definition of
FQDN see "FQDN requirements, page 30" (page 36)
Enter to continue.
Note:
•
The Primary Security Service must be up and running
at this point.
•
You need to know the password for the "nortel"
account on the Primary Security Service server.
Installation will fail if you do not know this password.
The Primary Security Service fingerprint screen appears as
shown in Figure 100 "Primary Security Service fingerprint
Nortel Communication Server 1000
NN43001-315 02.09
29 October 2008
Figure 98 "Primary Security Service server
98). Enter the IP address of
Figure 99 "Primary
. Press