Nortel 1000 Applications Installation And Commissioning page 128

128 COTS Servers
5
6
7
Changing the baud rate on an HP DL320 G4 Signaling Server
ATTENTION
The HP DL320 G4 server shipped through Nortel has a default Baud rate of
9600 b/ps and does not require a reset. Use this procedure only if you want to
use another Baud rate, or to correct the Baud rate after it is reset due to an
error.
Step
1
Linux Platform Base and Applications Installation and Commissioning
Copyright © 2007–2008 Nortel Networks
.
A BIOS Serial Console Port configuration screen appears. This
screen presents you with four options:
•
1 | Auto
•
2 | Disabled
•
3 | COM 1
•
4 | COM 2
Navigate to the COM 1 option and press Enter.
This configures the COM 1 port as the serial port for
communicating with the connected maintenance terminal.
The BIOS Serial Console & EMS configuration menu screen
reappears.
Press ESC to exit the BIOS Serial Console & EMS configuration
menu screen.
The RBSU menu screen reappears.
Press ESC to exit the ROM-based Setup Utility.
Action
Press Power to boot the server.
The server boots and the HP DL320 G4 boot screen appears.
Nortel Communication Server 1000
NN43001-315 02.09
29 October 2008
--End--