Nortel 1000 Applications Installation And Commissioning page 141

The patch 0 has been deactivated successfully.
SEE ALSO pload, pout, pins, pstat, plis
5.50 2007-12-18 POOS(1)
Table 11
Nortel Linux base CLI commands
Command
appinstall
appstart
appVersionShow
basefirewallconfig
baseparamsconfig
baseVersionShow
datetimeconfig
dnsconfig
ecnconfig
ftpdisable
ftpenable
ftpstatus
hostconfig
networkconfig
ntpconfig
passwd
pins
plis
pload
poos
pout
pstat
reboot
routeconfig
swVersionShow
sysbackup
sysrestore
upgrade
Linux Platform Base and Applications Installation and Commissioning
Copyright © 2007–2008 Nortel Networks
.
Description
Install Nortel applications.
Stop, start, or restart Nortel applications.
Print the server's application software version.
Configure firewall settings.
Configure base parameters.
Print the server's base software version.
Configure the date and time.
Configure DNS values.
Configure Explicit Congestion Notification settings.
Disable FTP.
Enable FTP.
Show the current FTP status.
Configure the static lookup table for host names.
Configure network settings.
Configure Network Time Protocol settings.
Change the user's password.
Put the patch in service.
Show detailed information about the patch.
Load the patch into the system database.
Put the patch out of service.
Unload the patch from the system database.
Show a list of installed patches.
Reboot the entire system.
Configure routing entries.
Print the server's software version.
Perform a system backup (both base and applications).
Perform a restore of the application data (backed up by sysbackup).
Select the backup data source and reinstall Linux base.
Nortel Communication Server 1000
NN43001-315 02.09
29 October 2008
IBM x306m server 141