Command Sent From The Host; Encryption Key Operation - HP StorageWorks P9000 - Disk Arrays Reference Manual

Table 6 Audit Log and Remote Web Console/SVP Operations (continued)
Function Name
Auto LUN
CPart
Shredder
Shredder
Shredder
XRC
HDDEasyReplace

Command sent from the host

The following table describes the function name output to the audit log file when receiving commands
from the host.
Table 7 Audit Log and Command Sent from Host
Function Name
Config Command
FC-SP
User Auth

Encryption Key operation

The following table shows the function name and the operation name concerning the encryption
key.
Table 8 Audit Log and Encryption Key Operation
Function Name
ENC
Operation Name
Create Auto Plan
Del Auto Plan Log
Del Migration Log
Delete Auto Plan
Set Auto Plan Param
Set Class Threshold
Set Fixed PG
Set Migration Vol
Set Plan Condition
Set Reserved Vol
Edit CLPR
Abort Shredding
End Shredding
Shred LDEVs
Set XRC Option
Replace
Description
A configuration command has been sent from a host or a computer using RAID
Manager.
Indicates when a configuration command was received.
Indicates that the FC-SP authentication is completed.
A user has logged in to or out from Remote Web Console.
Indicates when a user authentication command was received.
Operation Name
Backup Keys
Create Keys
Delete Keys
Edit Encryption
Restore Keys
Corresponding GUI Operation
Auto LUN
Editing CLPR settings
Aborting shredding an LDEV
Ending shredding an LDEV
Shredding an LDEV
Compatible XRC
Easy-Replace
Corresponding GUI Operation
Creating a backup of an encryption key
Creating encryption keys
Deleting encryption keys
Enabling/disabling the encryption in a parity group level
Restoring encryption keys
Command sent from the host 35