Detailed Information
Item
LDKC:CU:LDEV
UserAuth
Num. of LDEVs
[Install] System Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],System Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Spare Disk Recover=Full Speed
+Disk Copy Pace=Slower
+Copy Operation(Correction Copy)=OFF
+Copy Operation(Dynamic Sparing)=OFF
+Read Configuration Data Mode=OFF
+Link Failure Threshold=10
+{LDKC:CU:LDEV,Destage}=[{0x00:0x00:0x00,OFF}],
Num. of LDEVs=1
+{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1
+{LPR,Command Control}=[{System,10}],Num. of LPRs=1
+{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1
+Debug Mode=Set
Detailed Information
Item
Spare Disk Recover
Disk Copy Pace
Copy Operation
(Correction Copy)
Copy Operation
(Dynamic Sparing)
Read Configuration
Data Mode
Link Failure Threshold
LDKC:CU: LDEV
Destage
82
Audit log examples
Description
The LDKC, CU, and LDEV numbers of the volume where the user authentication is specified.
Indicates whether the user authentication is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the user authentication is set.
Description
Indicates the setting status of Spare Disk Recover.
Interleave: Give priority to the access from the host while executing copy process, Full speed:
Give priority to the copy process.
Indicates the setting status of Disk Copy Pace.
Slower: Low speed, Medium: Medium speed, Faster: High speed
Indicates the setting status of Copy Operation (Correction Copy).
ON: Execute Correction Copy, OFF: Do not execute Correction Copy
Indicates the setting status of Copy Operation (Dynamic Sparing).
ON: Execute Dynamic Sparing, OFF: Do not execute Dynamic Sparing
The method to allocate the serial number reported by Read Configuration Data command.
ON: Method supporting 4096, OFF: Traditional compatible method
The threshold to report link failure.
The LDKC number, the CU number, and the LDEV number.
Indicates the setting status of Destage.
ON: Execute write through operation (report the completion of the writing to the host after the
writing to the disk drive has completed).
OFF: Do not execute write through operation (report the completion of the writing to the host
when the data is written in the cache memory).