[Prov] Create Ldevs - HP StorageWorks P9000 - Disk Arrays Reference Manual

[PROV] Create LDEVs

Example 1
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Create LDEVs,Basic,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PG,LDKC:CU:LDEV,Start LBA,Emulation,Size,Unit,System Disk,
MP Blade ID}
=[{XX-XX,0xXX:0xXX:0xXX,XXXXXXXX,OPEN-V,XXXXXXXX,
KB,Disable,Auto},
{XX-XX,0xXX:0xXX:0xXX,XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable,0}],
Num. of LDEVs=2
Basic Information for Example 1
Parameter
Basic
External
Basic/External
Detailed Information for Example 1
Item
PG
LDKC:CU:LDEV
Start LBA
Emulation
Size
Unit
System Disk
MP Blade ID
Num. of LDEVs
Example 2: Snapshot
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Create LDEVs,Snapshot,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,LDKC:CU:LDEV,LDEVCapa(blocks),Emulation,CLPR,SSID,
MP Blade ID,Result}=[{-,0x00:0x00:0x00,96000,OPEN-V,0,0x0004,
Auto,
Normal end},{-,0x00:0x01:0x00,96000, OPEN-V, 0,0x0005,,
Auto,Normal end}],Num.of LDEVs=2
102 Audit log examples
Description
Create LDEVs was done to basic volumes.
Create LDEVs was done to external volumes.
Create LDEVs was done to both basic volumes and external volumes.
Description
The parity group number.
The parity group number whose first letter is "E" indicates that an external volume is present
in the parity group.
The LDKC, CU, and LDEV numbers.
The start LBA.
A hyphen (-) is output when not specified.
The emulation type.
The user-specified capacity.
The unit of the CV capacity. The output unit is different according to the setting.
KB: For open-system volumeCyl: For mainframe-system volumeLBA: When LBA is specified
Indicates system disk status.Enable: Enabled, Disable: Disabled
The specified MP blade ID.
"Auto" indicates the processor blade number is set automatically.
The number of LDEVs.