[Install] Restore Config; [Install] Set Battery Life - HP StorageWorks P9000 - Disk Arrays Reference Manual

Item
Use Duplex
SVP Kind
IPv4
IPv6
M-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)
S-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)

[Install] Restore Config.

Example 1
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Restore Config.,SVP&DKC,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information for Example 1
The SVP&DKC parameter indicates the configuration of SVP and DKC has been restored.
Example 2
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Restore Config,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx}
Detailed Information for Example 2
Item
New Ver.
Old Ver.

[Install] Set Battery Life

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Battery Life,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Use Battery Life,Date,Remained Life}
={Valid,YYYY/MM/DD,610}
76 Audit log examples
Description
The duplex status of the SVP.
Valid or Invalid will appear.
The kind of the duplex status.
Master SVP or Standby SVP will appear.
The status of IPv4 settings.
Valid or Invalid will appear.
The status of IPv6 settings.
Valid or Invalid will appear.
Master SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Standby SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Description
The new version number.
The old version number.