[Prov] Edit Ports(Topology); [Prov] Edit/Delete Pools - HP StorageWorks P9000 - Disk Arrays Reference Manual

+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto},{XX,4}],
Num. of Ports=4
Detailed Information
Item
Port
Speed(Gbps)
Num. of Ports

[PROV] Edit Ports(Topology)

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Topology),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed Information
Item
Port
Fabric
Connection
Num. of Ports

[PROV] Edit/Delete Pools

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit/Delete Pools,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Command,Pool ID,Pool Type,Threshold(%),Subscription Limit(%),
Result}
=[{Change,1,Snapshot,20,100,Normal end},
{Change,2,Snapshot,20,110,Normal end},
{Change,3,Snapshot,20,120,Normal end}],Num. of Pools = 3
Description
The name of the port that the channel speed is set.
The channel speed set.
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, 8: 8 Gbps, Auto: Auto mode.
The number of ports where the channel speed is set.
Description
The name of the port where the topology of Fibre Channel is changed.
Indicates whether the Fabric switch is enabled or disabled.
Disable or Enable is output.
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
The number of ports where the topology of Fibre Channel is changed.
Provisioning Descriptions 1 17