[Perf Mon] Delete Unused Wwns; [Perf Mon] Edit Cu Monitor Mode; [Perf Mon] Edit Monitoring Sw - HP StorageWorks P9000 - Disk Arrays Reference Manual

Detailed Information
Item
LDKC:CU:LDEV
Start LBA
End LBA
Num. of LDEVs

[Perf Mon] Delete Unused WWNs

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Delete Unused WWNs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx

[Perf Mon] Edit CU Monitor Mode

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit CU Monitor Mode,Enable,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+[LDKC:CU] = [0x00:0x00,0x00:0x01,0x00:0x02],Num. of CUs = 3
Basic Information
Parameter
Enable
Detailed Information
Item
LDKC:CU

[Perf Mon] Edit Monitoring SW

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit Monitoring SW,Enable 60sec,
Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information
Parameter
Enable XXsec
Disable
Description
The LDKC, CU, and LDEV numbers of the logical volume (for an open system) where the setting
information of Cache Residency cache is canceled.
The starting LBA number of the cancelled data.
The ending LBA number of the cancelled data. This number is output when only the ending LBA
is specified for the cancelled data.
The number of logical volumes (for an open system) where Cache Residency cache is canceled.
Description
The monitored CU is enabled.
Description
The ID of the monitored CU
The logical DKC number and the CU number are separated by colons and arranged in this
order.
Description
Monitoring is enabled and the gathering interval is set as XX sec.
Monitoring is disabled.
Performance Monitor Descriptions 93