[Prov] Edit Cmd Dev(Devgrp); [Prov] Edit Cmd Dev(Sec); [Prov] Edit Command Devices - HP StorageWorks P9000 - Disk Arrays Reference Manual

[PROV] Edit Cmd Dev(DevGrp)

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}
=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed Information
Item
LDKC:CU:LDEV
DevGrpDef
Num. of LDEVs

[PROV] Edit Cmd Dev(Sec)

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit CommandDevSec,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDevSec}=
[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed Information
Item
LDKC:CU:LDEV
CommandDevSec
Num. of LDEVs

[PROV] Edit Command Devices

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Command Devices,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},
{0xXX:0xXX:0xXX,Enable}],Num. of LDEVs=2
Description
The LDKC, CU, and LDEV numbers of the logical volume where the device groups setting is
changed.
Indicates whether the device groups setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the device groups setting is changed.
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device security
setting is changed.
Indicates whether the command device security setting is enabled or disabled. Disable or Enable
will appear.
The number of logical volumes that the command device security setting is changed.
Provisioning Descriptions 109