[Prov] Edit Ldevs(Tier); [Prov] Edit Mp Blades; [Prov] Edit Ports(Address) - HP StorageWorks P9000 - Disk Arrays Reference Manual

[PROV] Edit LDEVs(Tier)

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit LDEVs(Tier),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,LDKC:CU:LDEV,Tier Relocation}
=[{1,0x00:0x01:0x0F,0x80}],Num. of LDEVs = 1
Detailed Information
Item
Pool ID
LDKC:CU:LDEV
Tier Information
Num. of LDEVs

[PROV] Edit MP Blades

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit MP Blades,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{DKC,MP Blade ID,AutoAssignment,Result}
=[{0,0,Enable,Normal end}],Num. of MpBlades=1
Detailed Information
Item
DKC
MP Blade ID
AutoAssignment
Result
Num. of MpBlades

[PROV] Edit Ports(Address)

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Address),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num. of Ports=2
1 14 Audit log examples
Description
The pool number of the edited LDEV.
The LDKC number, CU number and the LDEV number of the edited volume.
Whether the tier relocation is enabled or disabled.
0x80: Enable, 0x00: Disable
The number of the edited LDEVs.
Description
The DKC number (0 to 1).
The MP Blade number in the DKC module displayed in the window (0 to 7).
Indicates whether the auto assignment setting is enabled or disabled.
Enable or Disable will appear.
The result of the operation
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of specified MP Blades (1 to 8).