[Prov] Set Security Switch; [Prov] Set Ssid; [Prov] Set Userauth - HP StorageWorks P9000 - Disk Arrays Reference Manual

Item
Option[0:31]
Option[32:63]
Option[64:95]
Num. of Host Groups

[PROV] Set Security Switch

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Security Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Detailed Information
Item
Port
Switch
Num. of Ports

[PROV] Set SSID

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Set SSID,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{SSID,LDKC:CU:LDEV}
=[{0xXXXX,0xXX:0xXX:0xXX},{0xXXXX,0xXX:0xXX:0xXX}],
Num. of SSIDs=2
Detailed Information
Item
SSID
LDKC:CU:LDEV
Num. of SSIDs

[PROV] Set UserAuth

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set UserAuth,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
130 Audit log examples
Description
The specified host mode option. The host mode options are configured with 96 units of 0 to 95,
and are divided into 32 units to output. Please see
for the relation of output values and host mode option.
Please see the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the
meaning of the host mode number.
The number of host groups that the host mode setting is changed.
Description
The name of the port where the LUN security setting is changed.
Indicates whether the LUN security setting is enabled or disabled.
Disable or Enable will appear.
The number of ports where the LUN security setting is changed.
Description
The SSID number.
The LDKC, CU, and LDEV numbers.
The number of SSID.
Table 12 (page 111) to Table 14 (page 113)