[Cnt Ac-S Z] Change Pair Option - HP StorageWorks P9000 - Disk Arrays Reference Manual

Detailed Information
Item
Max Initial Copy
CU Activity
Path Blockade Watch(s)
Path Blockade SIM
Watch(s)
Service SIM
LDKC
CU
Service SIM
PPRC Support
SCP Time(s)
Max Initial Copy
Num. of CUs

[Cnt Ac-S Z] Change Pair Option

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Change Pair Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{M-VOL(LDKC:CU:LDEV),Fence Level,CFW,Result}
=[{0x00:0x00:0x00,Never,Copy to R-VOL,Normal end},
{0x00:0x01,Never,Copy to R-VOL,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
Item
M-VOL(LDKC:CU:LDEV)
Fence Level
CFW
154 Audit log examples
Description
The maximum number of initial copy operations set. (1 to 512)
Indicates whether the parallel operation of initial copy by CU is enabled or not.
Enable or Disable will appear.
The path blockade watch period set. The unit is second.
The path blockade SIM watch period set. The unit is second.
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
The LDKC number.
The CU number of the CU on the primary site.
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
Indicates whether the host supports PPRC or not.
Yes: Support, No: Not support
The SCP delay time when the pair is suspended. The unit is second.
The number of parallel operation(s) of initial copy by CU. (1 to 16)
The number of CUs set.
Description
The LDKC, CU, and LDEV numbers of the main volume where the pair option is changed.
The changed fence level (the condition that MCU rejects the write operation to the main
volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Indicates whether the setting to copy the CFW data to the remote volume is enabled or
not.
Only M-VOL: Copy to main volume only is enabled
Copy to R-VOL: Copy to main and remote volume is enabled