Skip Over Perforation - Epson LX-810 User Manual

Skip Over Perforation
By changing the setting of DIP switch 2-3, you can set skip over ^
perforation to ON or OFF. If this feature is ON when using
continuous paper, a one-inch margin is provided between the last
printed line on one page and the first printable line on the next
page. This feature is very convenient if your application program
does not provide for top and bottom margins.
DIP
^2-3 ON (Skip over perforation ON)
456789:;<=>?®ABCDEFGHIJKLMN0PQRSTUVWX7
56789:; <=>?@ABCDEFGHIJKIiMNOPQRSTUVWXYZ
6789:;<=>?®ABCDEFGHIJKLMNOPQRSTUVWXYZ[
3-10 Using the Printer
If you adjust your loading position correctly, you can get half of
the margin at the bottom of one page and half at the top of the
next page, as shown in the following illustration.
DIP SW2-3 OFF (Skip over perforation OFF)
23456789:; <=>?®ABCDEFGHIJKIiMNOPQRSTUVW ^
3456789:;<=>?®ABCDEFGHIJKLMNOPQRSTUVWX
456789:; <=>?®ABCDEFGHIJKIiMNOPQRSTUVWXY
56789:;<=>?®ABCDEFGHIJKLMNOPQRSTUVWXYZ
6789j^; <=>?®ABCp^GHy mWOP^ST^^
789:;<=>?®ABCDEFGHIJKLMNOPQRSTUVWXYZ[\
89:;<=>?®ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]
9:; <=>?®ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]
:; <=>?®ABCDEFGHI JKLMNOPQRSTUVWXYZ [\] ^
;<=>?®ABCDEFGHIJKIMNOPQRSTUVWXYZ[\]
23456789:;<=>?®ABCDEFGHIJKIMNOPQRSTUW
3456789:;<=>?®ABCDEFGHIJKIMNOPQRSTUVW> ^