Setting
Character table
International character set for
italic table**
Manual feed wait time
* This setting is available only in IBM PPDS emulation mode.
** The options available for this setting vary depending on the country.
Skip over perforation
This feature is available only when continuous paper is selected.
When you turn on this feature, the printer provides a one-inch
(25.4 mm) margin between the last line printed on one page and
the first line printed on the next page. Because most application
program margin settings override margin settings from the
control panel, you should use this setting only if you cannot set
your top and bottom margins using your application.
118
Control Panel
Options (default in bold)
Standard model: italic, PC 437, PC 850,
PC 860, PC 863, PC 865, PC 861, BRASCII,
Abicomp, Roman 8, ISO Latin 1, PC858,
ISO8859-15
All other models: Italic, PC 437, PC 850,
PC 437 Greek, PC 853, PC855, PC 852, PC
857, PC 866, PC 869, MAZOWIA, Code
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC
774, Estonia, ISO 8859-2, PC 866 LAT., PC
866 UKR, PC-APTEC, PC708, PC720,
PC-AR864, PC 860, PC 865, PC 861, PC
863, BRASCSII, Abicomp, Roman 8, ISO
Latin 1, PC858, ISO8859-15, PC771,
PC437 Slovenia, PC MC, PC1250, PC1251
Italic U.S.A., Italic France, Italic Germany,
Italic U.K., Italic Denmark 1, Italic Sweden,
Italic Italy, Italic Spain 1
1 second, 1.5 seconds, 2 seconds, 3
seconds