Noise Displays On The Lcd Monitor; White Dots Appear On The Image; Flash Does Not Fire; Image Not Showing On Tv Monitor - Canon POWERSHOT S2 IS User Manual

Cameraautomatically
lightened the image
displayed on the LCD
monitorto make it easier
to see when shooting ina
darkaraa.
Light from the flash has
reflected off dust particles
or insects in the air. This
occurs more frequently in
the following conditions:
• When shooting at the
wide angle end,
• WhenshootJngwitha
high aperture value in the
aperture-priority AE
mode,
Flash is s_ to off.
fncarrect video system
setting.
Shooting mode set to
(Stitch Assist).
• There is no effect on the recorded image,
_See Night Display (p. 28)
• This is a phenomenon _hatoccurs with digital cameras and does
net constitute a malfunction,
Raise the flash so that it can fire,
_See Using the Flash (p, 40)
• Set the vi_,eo system to the appropriate setting, NTSC or PAL, for
yoor TV.
• The output will not appear on a TV monitor in _ (Stitch Assist)
mode. Cancel the Stitch Assist mode.
Memorycard was • Usea memorycardformatted withthis camera,
formatted in another _See Formatting a MemoryCard(p.20)
device.